Fed-batch and batch operating mode analysis of a stirred anaerobic sequencing reactor with self-immobilized biomass treating low-strength wastewater

This work presents an analysis of a stirred anaerobic sequencing discontinuous reactor with different substrate feeding strategies resulting in batch, fed-batch/batch and fed-batch operating modes. The reactor, containing granulated biomass, was fed with approximately 2.0L of synthetic domestic wastewater with Chemical Oxygen Demand of nearly 500 mg/L per cycle and operated at 30 degrees C and 50 rpm. Three feeding strategies with a total cycle time of 6 h, including 30-min settling, were adopted: batch mode with a fill cycle of 6 min, a fed-batch/batch mode with fill cycles of 60, 120 and 240 min and fed-batch mode with a fill cycle of 320 min. The system attained average non-filtered and filtered substrate removal efficiency of 78 and 84%, respectively, for all operating conditions, presenting good stability, solid retention and no granule break-up. A first order kinetic model with a residual organic matter concentration was proposed to analyze the influence of the feeding strategy on the performance during a cycle and bicarbonate alkalinity and total volatile acids concentration profiles were also quantified in order to verify the transient stability behavior.     

Characterization and recycling of polymeric components present in cell phones

The cell phone market is developing at a rapid speed. Today there are more than 1.6 billion consumers in the world, and the lifetime of a cell phone is less than 2 years. As a consequence, there is an increase in the waste associated to this product, and many alternatives to the disposal of the cell phones are being studied, such as recycling which shows to be the most important. It is crucial to know what materials constitute the cell phone in order to carry out recycling and determine environmental and economical issues. This work presents an evaluation of the cell phone components, characterizing the raw materials and some properties of the recycled materials.     

Assessment of the environmental profile of PLA,PET and PS clamshell containers using LCA methodology

Life cycle assessments of bio-based polymer resin and products historically have shown favorable results in terms of environmental impacts and energy use compared to petroleum-based products. However, calculation of these impacts always depends on the system and boundary conditions considered during the study. This paper reports a cradle-to-cradle Life Cycle Assessment (LCA) of poly(lactic acid) (PLA) in comparison with poly(ethylene terephthalate) (PET) and poly(styrene) (PS) thermoformed clamshell containers, used for packaging of strawberries with emphasis on different end-of-life scenarios. It considers all the inputs such as fertilizers, pesticides, herbicides and seed corn required for the growing and harvesting of corn used for manufacturing PLA. For PET and PS, the extraction of crude oil and the entire cracking processes from crude oil through styrene and ethylene glycol and terephathalic acid are considered. Global warming, aquatic acidification, aquatic eutrophication, aquatic ecotoxicity, ozone depletion, non-renewable energy and respiratory organics, land occupation and respiratory inorganics were the selected midpoint impact categories. The geographical scope of the study reflects data from Europe, North America and the Middle East. PET showed the highest overall values for all the impact categories, mainly due to the higher weight of the containers. The main impacts to the environment were the resin production and the transportation stage of the resins and containers. This implies that the transportation stage of the package is an important contributor to the environmental impact of the packaging systems, and that it cannot be diminished.     

An urban emissions inventory for South America and its application in numerical modeling of atmospheric chemical composition at local and regional scales

This work describes the development of an urban vehicle emissions inventory for South America, based on the analysis and aggregation of available inventories for major cities, with emphasis on its application in regional atmospheric chemistry modeling. Due to the limited number of available local inventories, urban emissions were extrapolated based on the correlation between city vehicle density and mobile source emissions of carbon monoxide (CO) and nitrogen oxides (NOx). Emissions were geographically distributed using a methodology that delimits urban areas using high spatial resolution remote sensing products. This numerical algorithm enabled a more precise representation of urban centers. The derived regional inventory was evaluated by analyzing the performance of a chemical weather forecast model in relation to observations of CO, NOx and O₃ in two different urban areas, São Paulo and Belo Horizonte. The gas mixing ratios simulated using the proposed regional inventory show good agreement with observations, consistently representing their hourly and daily variability. These results show that the integration of municipal inventories in a regional emissions map and their precise distribution in fine scale resolutions are important tools in regional atmospheric chemistry modeling.     

A Three-Dimensional Water Quality Model of Chicago Area Waterway System (CAWS)

As outfalls from various water reclamation plants, pumping stations, and combined sewer overflow outfalls discharge into the Chicago Area Waterway System (CAWS), an enhanced understanding of the final fate of crucial water quality state variables is of utmost importance. This paper reports the development and application of a 3D water quality model for a modified CAWS combined with the hydrodynamic kernel of Environmental Fluid Dynamics Code (EFDC). The modified CAWS is used to demonstrate the usefulness of the model while eliminating complications beyond the scope of this initial effort. The water quality model developed and presented in this research is a simplistic dissolved oxygen (DO)—biochemical oxygen demand model with the facility to account for the interaction between the water column and the bed. The aforementioned model is applied for the month of May 2009. The results from the hydrodynamic (EFDC) and water quality model is validated with the help of the observed data obtained from United States Geological Survey gaging stations and Metropolitan Water Reclamation District of Greater Chicago monitoring stations present inside the modeled domain. The 3D modeling captured the hydrodynamic and water-quality processes in CAWS in a satisfactory manner. Furthermore, modeling results showed and proved the interdependence of water quality characteristics in Bubbly Creek and CAWS with the effluent concentration from Racine Avenue Pumping Station situated at the head of Bubbly Creek, South Fork of South Branch of Chicago River.     

Transport of simazine in unsaturated sandy soil and predictions of its leaching under hypothetical field conditions

The potential contamination of groundwater by herbicides is often controlled by processes in the vadose zone, through which herbicides travel before entering groundwater. In the vadose zone, both physical and chemical processes affect the fate and transport of herbicides, therefore it is important to represent these processes by mathematical models to predict contaminant movement. To simulate the movement of simazine, a herbicide commonly used in Chilean vineyards, batch and miscible displacement column experiments were performed on a disturbed sandy soil to quantify the primary parameters and processes of simazine transport. Chloride (Cl(-)) was used as a non-reactive tracer, and simazine as the reactive tracer. The Hydrus-1D model was used to estimate the parameters by inversion from the breakthrough curves of the columns and to evaluate the potential groundwater contamination in a sandy soil from the Casablanca Valley, Chile. The two-site, chemical non-equilibrium model was observed to best represent the experimental results of the miscible displacement experiments in laboratory soil columns. Predictions of transport under hypothetical field conditions using the same soil from the column experiments were made for 40 years by applying herbicide during the first 20 years, and then halting the application and considering different rates of groundwater recharge. For recharge rates smaller than 84 mm year(-1), the predicted concentration of simazine at a depth of 1 m is below the U.S. EPA's maximum contaminant levels (4 microg L(-1)). After eight years of application at a groundwater recharge rate of 180 mm year(-1) (approximately 50% of the annual rainfall), simazine was found to reach the groundwater (located at 1 m depth) at a higher concentration (more than 40 microg L(-1)) than the existing guidelines in the USA and Europe.     

Mutagenic and recombinagenic activity of airborne particulates, PM10 and TSP, organic extracts in the Drosophila wing-spot test

The genotoxicity associated with air pollution in the city of Canoas, Rio Grande do Sul (Brazil), was assessed in November (spring) and January (summer). We applied the somatic mutation and recombination test (SMART) in Drosophila melanogaster in its standard version with normal bioactivation (ST) and in its variant with increased cytochrome P450-dependent biotransformation capacity (HB). The data indicated the genotoxicity of TSP and PM10 collected in November, in both ST and HB crosses. The genotoxic activity of the PM10 material in the spring sample was exclusively associated with the induction of mitotic recombination, whereas the TSP genetic toxicity was due to both recombinational as well as point and/or chromosomal mutation events. Considering PM10 collected in January, a positive response--100% (17.10 m3/ml) concentration--was observed in the HB cross, which was not detected in the ST cross.     

Seasonal evolution of beach waste and litter during the bathing season on the Catalan coast

Beach waste and litter composition and evolution on popular urban (located in the main nucleus of the municipality) and urbanized (located in residential areas outside the main nucleus) beaches of the Costa Brava (Catalan coast) were assessed during the bathing season. Waste and litter production (amount and composition) were affected by urbanization and varied during the summer. Urban beaches had higher densities of waste deposition and lower percentages of organic, domestic and other miscellaneous waste than urbanized beaches. Litter characteristics were also influenced by type of beach, and varied during the season as a consequence of beach use and cleaning practices, but not environmental factors. Urbanized beaches obtained higher scores for aesthetic quality of sand than urban beaches, and small-sized litter tended to accumulate during the season in the beach of Lloret Centre. The most important problems are management of recyclable materials, litter left by users on the sand, and separation of sand from litter. In addition, current efficiency of mechanical cleaning is low, especially in the withdrawal of cigarette butts. These analyses highlight problems that should be addressed in future management of area beaches.